Skip to main menu Skip to main content Skip to footer

Military, Aerospace & Government - ARCHIVE

Clear-Com intercom systems provide solutions for almost any communications need in the Military, Aerospace and Government world. The system is a specifically-configured communications solution intended to connect individuals who are working on the same project at the same time. As opposed to the classic telephone system, a Clear-Com system can provide a secure, highly reliable, low latent path which allows communication between two or hundreds of people simultaneously.

Latest
News

Keep up with our latest project highlights, event recaps, and company updates.

FIM-S222 (DISCONTINUED)
Clear-Com Marketing
/ Categories: Products

FIM-S222 (DISCONTINUED)

Optical Fiber Interface

  • For use with Eclipse HX Digital Matrix systems
  • Interfaces with one or two digital matrix panels
  • Highly secure connections
  • 24-bit digital DEMUX
  • 48kHz audio sampling rate
  • Sends and receives RS-422 control data
  • Flat frequency response up to 20kHz, S/N >80dB
  • Up to 20km (12 miles) range with fiber using single mode
  • Up to 5km (3 miles) using multi-mode fiber
  • Works in demanding environmental conditions
  • RJ45 connectors for direct connection with matrix panels, frames and interfaces
  • Can be used to extend any line level 4-wire audio signal / RS-422 signal
  • Can be used with the earlier FIM-102D but the audio will require 5dB of gain.
  • Can be used with the FIM-1222 Fiber cards
Next Article BS121 (Last Time Buy)
Print
1655 Rate this article:
No rating
Item Code

FIM-S222

Technical Specifications Left
Audio

Transmission Method: Digital, TDM, 24-bit, 48k samples/sec

Input Impedance: 600 Ohms, balanced

Output Impedance: 30 Ohms, balanced

Maximum Input Level (600 Ohms): +18dBm (peak)

Maximum Output Level (from 30 Ohms): +18dBm into 600 Ohms

Frequency Response (@0dBm from 50Hz to 15kHz): ±0.2 dB

Total Harmonic Distortion + Noise: from 20Hz to 20kHz @ +8dBm, <0.2% at 1kHz @ +18dBm, <0.007%

CMRR (Common Mode Rejection Ratio): ±55db @ 1kHz

Signal to Noise Ratio: unweighted, 20Hz - 20kHz, ref. to +18dBm clip level, >80dB

Aggregate Digital Data Rate: 147.456 MB

 
Electro-Optical System Margin Data

Operating Wavelength: 1300nm

TX output into cable: -8 to -15dBm

RX sensitivity: =31dBm

OP Margin Single Mode: 19dBm

OP Margin Multi Mode: 12dBm

 
Matrix Data Communications (Frame-to-Panel Digital Data)
Transmission Rate

RS-422, Balanced TTL Levels: 0 to 150 kBits/sec

Jitter: 1.12 msec* *Higher rates possible dependent upon user system jitter tolerance

Technical Specifications Right
Connectors

Connectors: RJ-45, coaxial

Optical Connectors: ST-type

Power Connector: 2.5mm Circular

 
Power Supply

Input Voltage Range: 9-18V DC

Power Consumption: @13.8V per end, all channels at full level; <5 watts

A/C Adapter: Supplied

 
Temperature

Operating: -40° - +149°F (-40° - +65°C)

Humidity: 0 – 95%, non-condensing

 
Dimensions

7.1 x 3.3 x 1.1in (WxHxD)

(180.3 x 83.8 x 27.9mm)

 
Weight
0.5lbs (0.23kg)
Mark as DiscontinuedDiscontinued
Rank9999
IsActiveTest
Please login or register to post comments.

Industry
Affiliations

NAB company logo
AIMS company logo
ASD company logo
NAMM company logo

Contacts

Contact 1

Contact 2

Contact 3

FIND A RESELLER OR RENTAL PARTNER

Whether you are looking for a simple wired intercom system for small theatre, a wireless intercom system for an outdoor live event, or a multi-system intercom network for a large-scale broadcast production.

Find a Rental Partner