Here’s a handy tip for the standard pinout to use when using CAT5 cable with XLR connectors for HelixNet Partyline: XLR CAT5 1 Orange & Orange/White (RJ45 2 & 1) – Ground 2 Green, Green/White, & Brown/White (RJ45 6, 3 & 7) - PWR +ve 30v & Digital Audio 3 Blue, Blue/White & Brown (RJ45 4, 5 & 8) - PWR-ve 30v & Digital Audio *Note: If you are using CAT5E cable, then put the screen of the cable to the XLR chassis.

ESPN expanded its surround audio capabilities...

See notes in the Eclipse matrix V-Series user panel manual in section 4-10. Above is the female DB-25 on the back of the V-Series panel.     Get a DB-25 Male connector to connect to the V-Series panel’s DB-25 female. See the pinout above and the description below. Jump pins 9 and 10 together. Connect pins 21 and 22 to the (+) and (-) legs of the switch. In ECS, highlight the port with the V-Series panel you wish to control with the footswitch. In the LOGIC INPUTS category, ...

Andøya Test Centre (ATC) has just confirmed...