HelixNet System Hosts
Arcadia: Supports up to 128 HelixNet User Stations over Ethernet or Powerline via the HXII-DPL Powerline Device. Up to 24 Channels can be HelixNet Enabled using a Licensed Port for assignment to any HelixNet User Station keyset.
HMS-4X: Supports up to 64 endpoints (Remote Stations, Speaker Stations, Beltpacks, HLI-2W2, HLI-4W2, LQ port). User stations can connect directly to the 2 HMS-4X Powerlines or via optional HLI-ET2 module using HXII-DPL Powerline Device or 3rd party network switch connection. HMS allows use of 12 channels which can be expanded to 24 using optional license.
Connectors
Powerline: Powerline, Terminal Block 5 pole, 5mm pitch
Ethernet/PoE: RJ45
Headset: 4-pin XLR–M or 7-pin XLR-M with (2) PTT GPI (-X7)
Gooseneck Mic: 3-pin Tuchel
Power Connector: Terminal Block 2 Pole, 5mm
Microphone Pre-amplifier
Headset Mic Impedance: 200Ω (Dynamic)
Headset Mic Voltage: 1.7V (Electret selectable)
Limiter: +23dB
Route to four-wire output at 0dBu out:
Mic Gain: 60dB (Dynamic), 45dB (Electret)
Frequency Response: 300Hz - 10 kHz ± 3dB, contoured for intelligibility
Distortion: <0.1% THD @ 1kHz
Noise: <-65dBu
Headphone Limiter: 0dB (selectable)
Headphone Amplifier
Load Impedance: >32Ω
Output Level: +12dBu before clipping
Sidetone: -12dB (selectable)
Route from a four-wire input at 0dBu in:
Max Gain: 0dB
Frequency Response: 40Hz - 10kHz ±3dB
Distortion: <0.1% THD @ 1kHz
Noise: -65dBu
Headphone Limiter: 0dB (selectable)
Loudspeaker Amplifier
Load Impedance: 8Ω
Output Level: +18dBu before clipping
Route from a 4-wire input at 0dBu in:
Max Gain: 18dB
Frequency Response: 200Hz - 10kHz ±3dB
Distortion: <0.1% THD @ 1kHz
Noise: <-50dBu
Logic Inputs - PTT/GPI (-X7 only)
Assignable to talk, call, mic and headset keys
Input: 2
Style: Powered input, close contact to ground
Detection Voltage (Min): 3V
Input Voltage (Max): 5V
Output Voltage: 5V
Output Current (Max): 1mA
Device Power
Voltage: 48V DC
Current (Max): 0.3A
Power (Max): 14.4W
BTU (Max): 49BTU/hr
Input Power Connector: Terminal Block 2 Pole, 5mm
This unit can be powered via:
AC Adapter - Wall (not included)
Input Voltage Range: 100 - 240V AC
Input Frequency Range: 50 - 60Hz
Input Power Connector: Universal
Output Voltage: 48V DC
Output Power (Max): 15W
Output Power Connector: KPPX-3-P
PoE - Power over Ethernet
IEEE 802.3af-2003 - Class 0
PSE: 15.4W DC max @ Power Source Req.
PD: 12.95W DC max @ Powered Device Draw
Note: HelixNet Speaker Station must be earthed to a clean ground when PoE is used. Preferably with the screen of a sheilded CAT5/6 cable.
Powerline:
Input Voltage: ±29.5V DC
Input Current (Speaker Off): 0.3A
Input Current (Max): 0.5A
Powerline Utilization:
Speaker Station (Local Power) = 1 beltpack
Speaker Station (Speaker Off) = 2 beltpacks
Speaker Station (Speaker On) = 3 beltpacks
Note the maximum Powerline capacity of the HMS-4X.
Use HelixNet Cable Calculator to validate load and cable distance.
Environmental
32º - +113ºF (0 - +45ºC)
90% relative humidity
Dimensions
4-Gang NEMA, 4.5 x 8.2 x 2.4in (HxWxD)
(114 x 209 x 61mm)
Weight
HKII-KB: 15.2oz (0.43kg)
HKB-2X: 18.8oz (0.53kg)
Network Specifications (Firmware Version 4.5+)
Network Protocols
Ethernet IPv4 – Unicast Audio and Control
mDNS – Multicast Device Discovery
Layer 3-Routable w. mDNS function limitations
HTTP-Management
I.V. Core–Decentralized Network Routing & Mixing
IVP-Proprietary intercom Audio and Control
WavPack – Audio Codec
Network Ports
Unicast:
Port 80 TCP – System Management
Port 6001 TCP – System Management
Port 6001 UDP - Audio Streams
Multicast:
Port 5353 UDP – mDNS, Names, Discovery, Linking
Optional for device names and linking
Network Parameters
HMS-4X Endpoint Resource Use: 1
Bandwidth:
300 (max) kbps from each Speaker Station to Arcadia/HMS-4X
1200 (max) kbps from Arcadia/HMS-4X to Speaker Station
Network Jitter Tolerance: <= 128ms jitter buffer per audio stream receiver automatically adjusted to network performance
QoS tags: DSCP=34 Assured Forwarding (AF=41)
Link-Local Default IP address range: 169.254.0.0/16
System reserved IP range:
10.0.0.0/24 for endpoints on HMS-4X
10.0.0.0-7 for Arcadia
Recommended Ethernet Switches
• Managed Ethernet Switch – Layer 3
• 100/1000 Base-T ports for endpoints
• 1000 Base IP Trunks between switches
• QoS configuration • Energy Efficient Ethernet bypass option
• IGMP Snooping bypass option
Please refer to the Clear-Com HelixNet Network Guide for additional switch settings and network characteristics.