Clear-Com > Product
Skip to main menu Skip to main content Skip to footer

Cables for Wiring Partyline Products

Partyline: Is there a recommended cable list for wiring partyline products? The Clear-Com intercom line is intended to run on one shielded cable pair per intercom channel. One conductor carries audio and the other conductor carries the DC power for Remote Stations. The shield serves as the ground return for the audio and power conductors. When choosing interconnect cable, keep the following considerations in mind:   Keep cable runs under 500 feet (150m). The DC resistance of the ground or ...

FIM-S222 (DISCONTINUED)

Optical Fiber Interface

Clear-Com Marketing 0 5982 Article rating: No rating

The FIM-S222 optical fiber interface allows one or two digital matrix intercom user panels, interface modules or 4-wire sources to be remotely connected to Eclipse, Eclipse HX and Matrix +3 intercom systems over optical fiber. A pair of FIM-S222 interfaces is required for each fiber link; one at the matrix frame and the other at the matrix user panel. See FIM-4W2 as a replacement for the FIM-S222.

Route66 Series (DISCONTINUED)

2RU 40x40 Optical Multiplexer Devices

Clear-Com Marketing 0 7418 Article rating: No rating

The Route66 Series are fiber interfaces that routes multiple professional video and audio signals, such as SD/HD/3G-SDI over the same optical fiber. The 2RU interface has a 40x40 optical MUX and router for up to 24 BNC-SDI 3G/HD/SD video ports, up to 20 duplex or 36 simplex protocol-independent LC fiber ports. The Route66 also features a VSync board with selectable synchronization formats from Word, BB and Tri-level.

RSS
First4950515254565758Last

Resources

No items defined.

Associated
Products

Ready to get
started?

Our team of communications professionals are here to support your project. Contact us today to start designing your custom intercom solution.

Sales Contacts Where to Buy/Rent