Skip to main menu Skip to main content Skip to footer

Military, Aerospace & Government - ARCHIVE

Clear-Com intercom systems provide solutions for almost any communications need in the Military, Aerospace and Government world. The system is a specifically-configured communications solution intended to connect individuals who are working on the same project at the same time. As opposed to the classic telephone system, a Clear-Com system can provide a secure, highly reliable, low latent path which allows communication between two or hundreds of people simultaneously.

Latest
News

Keep up with our latest project highlights, event recaps, and company updates.

PRC-2 (DISCONTINUED)
Clear-Com Marketing
/ Categories: Products

PRC-2 (DISCONTINUED)

  • UHF Wireless IFB Receiver Beltpack
  • Operate between 486.4 and 639.9MHz
  • Preset (default) frequency can be set without power or transmitter signal
  • Frequency agile with 256 frequencies
  • Scan mode stores up to five additional frequencies
  • High sensitivity for extended operating range indoors or outdoors
  • 8 hours battery life (alkaline)
  • 20 hours battery life (lithium)

NOTE: This product is not approved for sale in Europe.

Next Article WBS-670 (DISCONTINUED)
Print
2541 Rate this article:
No rating
Item Code

PRC2-19 (Block 19: 486.4 to 511.9 MHz),

PRC2-21 (Block 21: 537.6 to 563.1 MHz),

PRC-2/D (Block 24*: 614.4 to 639.9 MHz)

*This block is targeted to be banned by the FCC for use within the US by July 13 2020

Technical Specifications Left

Operating Frequencies: 486.4 to 639.9 MHz

Block 19: 486.4 to 511.9 MHz

Block 21: 537.6 to 563.1 MHz

Block 24: 614.4 to 639.9 MHz*

*This block is targeted to be banned by the FCC for use within the US by July 13, 2020.

Frequency control:

Crystal Controlled PLL Sensitivity: 1 uv (20 dB SINAD)

Signal/Noise ratio: 95 dB A-weighted

Squelch quieting: 90 dB

AM rejection: 50 dB, 10 uV to 100 mV

Modulation acceptance: ±20 kHz

Technical Specifications Right

Spurious rejection: Greater than 70 dB

Third order intercept: 0 dBm

Frequency response: 100 Hz to 10 kHz, (±1db)

Pilot tone: 29.997 kHz, 4.5 kHz deviation (fixed crystal controlled)

Audio output: 1V RMS into 50 Ohms minimum

Antenna: Headphone cable

Programmable memory: Switches set default frequency; up to five additional frequencies can be stored in memory

Front panel controls: Single knob controls Audio Output Level, Power on, programming

Scan Frequency Selection Indicators: Multi-color LED indicator for power on and battery status. Blinks to indicate channel number and during scanning.

Power requirement:

9V alkaline battery lasts about 8 hours

9V lithium battery lasts about 20 hours

Power consumption: 60 mA

Weight: 7.3 oz with battery

Size: 3.6 x 2.4 x 0.8 inches (housing only) (belt clip and knob extend beyond the housing)

Mark as DiscontinuedDiscontinued
Rank9999
IsActiveTest
Please login or register to post comments.

Industry
Affiliations

NAB company logo
AIMS company logo
ASD company logo
NAMM company logo

Contacts

Contact 1

Contact 2

Contact 3

FIND A RESELLER OR RENTAL PARTNER

Whether you are looking for a simple wired intercom system for small theatre, a wireless intercom system for an outdoor live event, or a multi-system intercom network for a large-scale broadcast production.

Find a Rental Partner