Interpreting the Site Survey screen
The 4 numbers on this screen represent, from left to right: Antenna, RSSI (Received Signal Strength Indication), FER (Frame Error Rate) and Link Quality (this figure is a calculation based on RSSI and FER).
Show me. Click/touch image to enlarge/reduce.
Antenna coverage zone
Antenna coverage zone = area where
- RSSI => 30
- Link Quality => 3
FER should be as close to 0 as possible.
Below these figures, the beltpacks may start to lose audio. All beltpacks in the system must have sufficient ratings.
Note: You can press the Mode button on the front of the Base Station to check antenna performance at any time.
Related links