Home >Topics > Base Station > Base Station specifications

Specifications: Base Station

   
Base Station to beltpack frequency response 100 Hz- 7.1 kHz
Number of FS II beltpacks per Base Station 5 (FS-BASE-II-5) or 25 (FS-BASE-II), depending on model
Number of antennas (FS-TA) supported by Base Station 2 direct or 10 via antenna splitters
Number of antenna ports 2 x RJ45 & 2 x Fiber (2 active at any time)
Programming port 2 x LAN
GPIO port

DB15;

  • 4 x relay outputs, normally open and normally closed wiring
  • 2 x GPI
Partyline: A,B,C,D

XLR-3F, ON/OFF termination control.

Power ON/OFF (A/B, C/D paired)
4 -wire 4 x RJ45 for 4-wire
Program input XLR-3F, transformer isolated, line-level input, independent Program Input level control via rotary encoder
Stage Announce output XLR-3M, transformer isolated, line-level output with dedicated front panel Talk key
Front panel headset 4-pin (or 5-pin male connector depending on model). Automatic mic detect
4 x programmable front panel keysets
  • 128 x 64 OLED
  • Talk and Call keys with LEDs
  • Listen key on rotary encoder for level control (with LED)
Front panel buttons
  • Headset mic ON/OFF
  • Monitor display (Mode)
  • Configuration Menu
  • Stage announce Talk (SA)
  • All Talk
  • Remote mic kill (RMK)
Front panel indicators
  • Antenna status
  • Beltpack status

Front panel encoders

Program input level control with cut and LED indication

 
Radio frequency (RF) synch Rear RF input and output sync connectors
Power input
  • Internal power supply with IEC C14 connector (male)
  • DC input connection for 12V DC

 
Dimensions

1 RU 

44 x 442 x 250 mm (1.75 x 17.4 x 9.8 inches)
Weight Approx 2.3 kg (5 lb)