Resources

IKB-12 and HRI-12 intercom stations are designed to be a part of the HCS Industrial Intercom System providing a high-capacity single channel partyline intercom to intercom stations with point-to-point and point-to-multipoint audible and visual call signalling with caller identification. The stations are flush mount installation on an electrical back box. They include an active handset cradle which detects the handset and places the station into the partyline when taken off hook. 

HCS system is configured using a browser-based tool accessed from the HMS-4X main station, running the HCS firmware, using a web browser. Users can create Profiles for the IKB/HRI stations and assign point-to-point and point-to-multipoint call signals to the stations buttons and GPI.

The HelixNets HMS-4X main station is a combination of a system host and an intercom user station with XLR Powerline connections to user stations. HMS-4X hosts up to three HLI interface modules for external connectivity including Ethernet and Fiber. The HelixNet IP networking guide provides specifications, best practices and guidance for the integration of HelixNet into an existing or new IP network.

The HMS-4X is also available for use with the HCS Industrial Intercom System which consists of the HLI-ET2 module, IKB-12 and HRI-12 Intercom User Stations and the HCS firmware.

Please contact Clear-Com for further information.

The HS-6 is a push-to-talk switch with a 4-pin female XLR-connector.

The HelixNet HLI-ET2 is a dual port Ethernet switch interface module for the HMS-4X main station. The HelixNet IP networking guide provides specifications, best practices and guidance for the integration of HelixNet into an existing or new IP network.

HLI-ET2 is also available for use with the HCS Industrial Intercom System which consists of the HMS-4X Main Station, IKB-12 and HRI-12 Intercom User Stations and the HCS firmware. Please contact Clear-Com for further information.