IKB-12P
Single-Channel Intercom Station with Loud Alert Buzzer
HCS Industrial Intercom
- Single Channel Partyline
- Advanced Call Signals
- Point-To-Point
- Point-To-Multipoint
- Audible Buzzer
- Visual Caller Identification
HMS-4X Main Station
- Networked System Host
- 1 HMS-4X* with HLI-ET2 per system
- HCS Firmware Features
- Cold Standby Redundancy
IKB/HRI Intercom Stations
- Up to 64 IKB/HRI Intercom Stations
- Handset
- 12 Buttons for Call Signals
- 28 GPI for Call Signals
- IP65 Environmental Rating**
HCS Configuration & Management
- Easy to use browser configuration
- Fast front panel control & configuration
- Plug-and-go with auto discovery
- Central upgrades from main station
*Specifications and features listed here supercede the capabilities listed in the HMS-4X datasheet.
**Flush-mounted to a wall or back box, with appropriate perimeter seals.
| Item Code | HMS-4X: Main Station
HLI-ET2: Ethernet Module
HCS.2.1.0: Firmware
IKB-12P: Intercom Station
HRI-12B: Intercom Station–Without logo
HRI-12M: Intercom Station–Narrow, without logo
HS-6: Handset
HCS system capabilities and IKB/HRI-12 handset stations are only compatible with the above system components.
Please call Clear-Com to reserve HMS-4X for your HCS system project
|
| Technical Specifications Left |
HCS System Host
HMS-4X with HCS Firmware*: Supports up to 64 endpoints (IKB-12P, HRI-12B, HRI-12M). User stations can connect via the HLI-ET2 module using 3rd party network switch connection. HMS-4X allows use of 1 channel when hosting the HCS firmware.
IKB/HRI-12 Intercom Station
Connectors
Ethernet/PoE: RJ45
Handset: 4-pin XLR-M
GPI: (2) Terminal Block 16 Pole, 3.8mm
Microphone Pre-amplifier
Handset Mic Impedance: 200Ω (Dynamic)
Limiter: +23dB
Mic Gain: 60dB (Dynamic)
Frequency Response: 400Hz - 8kHz ± 3dB, contoured for intelligibility
Distortion: <0.1% THD @ 1kHz
Noise: <-65dBu
Headphone Limiter: 0dB (selectable)
Headphone Pre-amplifier
Load Impedance: >32Ω
Output Level: +12dBu before clipping
Sidetone: -6dB (selectable)
Max Gain: 12dB
Noise: <-65dBu
Headphone Limiter: 0dB (selectable)
Logic Input - GPI (Internal)
Assignable to Profile(s) Call signals
Input: 28
Style: Powered input, close contact to ground
Detection Voltage (Min): 3V
Input Voltage (Max): 5V
Output Voltage: 5V
Output Current (Max): 1mA
|
| Technical Specifications Right |
Device Power
Power (Max): 5W
BTU (Max): 17BTU/hour
This unit can be powered via:
PoE – Power over Ethernet
IEEE 802.3af-2003 - Class 0
PSE: 15.4W DC max @ Power Source Req.
PD: 12.95W DC max @ Powered Device Draw
Note: Handset Station must be earthed to a clean ground when PoE is used. Preferably with the screen of a shielded CAT5/6 cable.
Environmental
Humidity: 0-95%, relative
Temperature: -14° to 131°F (-10° to +55°C)
Dimensions
IKB-12P/HRI-12B: 8 x 10 x 3.6in (HxWxD)
(203 x 254 x 93mm)
HRI-12M: 6.3 x 11.2 x 3.6in (HxWxD)
(160 x 285 x 93mm)
Weight
27.9oz (0.79kg)
*Specifications and features listed here supercede the capabilities listed in the HMS-4X datasheet.
**Flush-mounted to a wall or back box, with appropriate perimeter seals.
|
| Mark as Discontinued | No |
| Rank | 9999 |
| IsActiveTest | |