Home chevron_right Products chevron_right WBS-680 (DISCONTINUED)

WBS-680 (DISCONTINUED)

Details

Operates in select frequency bands between 590-608MHz
Two separate channels for 2-wire, 4-wire, or both
Supports up to 4 full-duplex wireless beltpacks
Wireless-Talk-Around button momentarily routes audio to only the wireless beltpacks monitoring the current channel
Full talk/listen headset at the base
Rear panel connections allow system expansion
Input and output level adjustment controls
Stage Announce (SA) button

Item Code

WBS-680/E88

Technical
Specifications

Base Station

RF Frequency Range: 518-608MHz, 614-686MHz in 18MHz TX and RX bands

Power Requirement: 100-240V AC, 50-60Hz, IEC receptacle

Typical Battery Life Alkaline: N/A

Typical Battery Life - Nickel Metal Hydride (1500 mAh): N/A

Current Draw: N/A

Temperature Range: -4oF to 140oF (20oC to 55oC)

Dimensions: 19.0 x 1.72 x 14.0in (WxHxD)

(48.3 x 4.4 x 35.6cm)

Weight: 7 lbs. 2 oz. (3.24 kg)

Transmit Antenna: 1/2 Wave (supplied), TNC Male Connector

Receiver Antenna: 1/2 Wave (supplied), TNC Male Connector

FCC ID: B5DM514

Frequency Response: 300Hz - 8,000Hz

Four-Wire Input: Level Adjustable (2 Vrms typical)

Four-Wire Output: Level Adjustable (2 Vrms typical)

Clear-Com® Party-line Levels: Input/Output Level Adjustable (1 Vrms typical), Line Impedance 200 W

RTS® Party-line Levels: Input/Output Level Adjustable (0.775 Vrms typical), Line Impedance 200 W

Telex® Party-line Levels: Input/Output Level Adjustable (1 Vrms typical), Line Impedance 300 W

Auxiliary Input: Adjustable (2 Vrms typical)

Auliliary Output: Adjustable (2 Vrms typical into 600 W) (at rated deviation)

Stage Announce Output (WBS-680 only): Internally Adjustable (1Vrms typical at rated deviation into 100K W)

Stage Announce Relay (WBS-680 only): Dry contact, rated at 1Amp, 24 V Max. / N/A

Transmitter

Type: Synthesized, 720 channels

Transmit Power: WBS-680: 100 mW max. (High), 10 mW (normal)

RF Frequency Stability: 0.005%

Modulation: FM, 40 KHz Deviation

Modulation Limiter: Peak-Responding Compressor

Modulation Frequency Range: 300 Hz -8,000 Hz +-2 dB

Microphone Audio Input: 30 W - 3,500 W

Microphone Input Sensitivity: 9 mV

Radiated Harmonics & Spurious: Exceeds FCC specifications

FCC Acceptance: Type accepted under FCC Part 74

Receiver

Type: Dual Conversion Superheterodyne, Synthesized, FM, 720 channels

RF Sensitivity: <0.7 mV for 12 dB SINAD

Signal-to-Noise Ratio: 95 dB

IF Selectivity: 3 dB at 230 KHz

Image Rejection: 70 dB or better

Squelch Quieting: 95 dB

RF Frequency Stability: 0.005%

Distortion: <1% at full deviation

Local Headset Output: 40mW output into 600 W (1% distortion)

FCC Acceptance: Notification under FCC Part 15

Important Notice:

The FCC has finished its sale of the 600 MHz frequency bands in the United States, and has set a date of July 13, 2020, for wireless intercom users to cease operation in the 617-652 MHz and 663-698 MHz frequencies. If you are in the US and planning on purchasing a WBS system, please order the following models: WBS-680/E88 WTR-680/E88