IKB-12P
Skip to main menu Skip to main content Skip to footer
Home chevron_right Products chevron_right Products By Name chevron_right Trilogy Mercury
IKB-12P
Clear-Com Marketing
/ Categories: Products, Industrial Digital System, Industrial and Ride Control

IKB-12P

Single-Channel Intercom Station with Loud Alert Buzzer

HCS Industrial Intercom

  • Single Channel Partyline
  • Advanced Call Signals
    • Point-To-Point
    • Point-To-Multipoint
    • Audible Buzzer
    • Visual Caller Identification

HMS-4X Main Station

  • Networked System Host
  • 1 HMS-4X* with HLI-ET2 per system
  • HCS Firmware Features
  • Cold Standby Redundancy

IKB/HRI Intercom Stations

  • Up to 64 IKB/HRI Intercom Stations
    • Handset
    • 12 Buttons for Call Signals
    • 28 GPI for Call Signals
    • IP65 Environmental Rating**

HCS Configuration & Management

  • Easy to use browser configuration
  • Fast front panel control & configuration
  • Plug-and-go with auto discovery
  • Central upgrades from main station

*Specifications and features listed here supercede the capabilities listed in the HMS-4X datasheet.
**Flush-mounted to a wall or back box, with appropriate perimeter seals.

Print
10139 Rate this article:
No rating
Item Code

HMS-4X: Main Station
HLI-ET2: Ethernet Module
HCS.2.1.0: Firmware
IKB-12P: Intercom Station
HRI-12B: Intercom Station–Without logo
HRI-12M: Intercom Station–Narrow, without logo
HS-6: Handset

HCS system capabilities and IKB/HRI-12 handset stations are only compatible with the above system components.

Please call Clear-Com to reserve HMS-4X for your HCS system project

 

Technical Specifications Left
HCS System Host

HMS-4X with HCS Firmware*: Supports up to 64 endpoints (IKB-12P, HRI-12B, HRI-12M). User stations can connect via the HLI-ET2 module using 3rd party network switch connection. HMS-4X allows use of 1 channel when hosting the HCS firmware.

 

IKB/HRI-12 Intercom Station

Connectors

Ethernet/PoE: RJ45
Handset: 4-pin XLR-M
GPI: (2) Terminal Block 16 Pole, 3.8mm

Microphone Pre-amplifier

Handset Mic Impedance: 200Ω (Dynamic)
Limiter: +23dB
Mic Gain: 60dB (Dynamic)
Frequency Response: 400Hz - 8kHz ± 3dB, contoured for intelligibility
Distortion: <0.1% THD @ 1kHz
Noise: <-65dBu
Headphone Limiter: 0dB (selectable)

Headphone Pre-amplifier

Load Impedance: >32Ω
Output Level: +12dBu before clipping
Sidetone: -6dB (selectable)
Max Gain: 12dB
Noise: <-65dBu
Headphone Limiter: 0dB (selectable)

Logic Input - GPI (Internal)
Assignable to Profile(s) Call signals
Input: 28
Style: Powered input, close contact to ground
Detection Voltage (Min): 3V
Input Voltage (Max): 5V
Output Voltage: 5V
Output Current (Max): 1mA

Technical Specifications Right
Device Power

Power (Max): 5W
BTU (Max): 17BTU/hour

This unit can be powered via:
PoE – Power over Ethernet
IEEE 802.3af-2003 - Class 0
PSE: 15.4W DC max @ Power Source Req.
PD: 12.95W DC max @ Powered Device Draw

Note: Handset Station must be earthed to a clean ground when PoE is used. Preferably with the screen of a shielded CAT5/6 cable.

 

Environmental

Humidity: 0-95%, relative
Temperature: -14° to 131°F (-10° to +55°C)

 

Dimensions

IKB-12P/HRI-12B: 8 x 10 x 3.6in (HxWxD)
(203 x 254 x 93mm)
HRI-12M: 6.3 x 11.2 x 3.6in (HxWxD)
(160 x 285 x 93mm)

 

Weight

27.9oz (0.79kg)

 

*Specifications and features listed here supercede the capabilities listed in the HMS-4X datasheet.
**Flush-mounted to a wall or back box, with appropriate perimeter seals.

Mark as DiscontinuedNo
Rank9999
IsActiveTest

More links

Please login or register to post comments.

Why Choose Trilogy Mercury?

Flexible Architecture with Seamless Integration

Mercury by Trilogy is built for long-term adaptability, offering native interoperability with SIP/VoIP and legacy systems to protect your existing investments. Its modular design supports system expansion as your needs evolve, while Mercury Interface and Communicator Units provide 64 dynamically allocated IP audio channels per host. These channels enable simultaneous, enterprise-wide communication across globally distributed networks—ensuring your teams stay connected, wherever they are.

Scalable Communication for any Scenario

Mercury supports point-to-point, group, and conference calls, offering flexible communication options for diverse needs. When deployed on multicast-enabled networks, Mercury enables efficient bandwidth usage for large-scale conferencing with hundreds of users. It also allows IP audio channels to be reserved for static audio trunks or emergency communications, ensuring reliability when it matters most.

Retail Warehouse Communications

Cashiers, Operations and the Warehouse are all connected via an IP network on which audio can be delivered. At Customer Checkout, cashiers POS stations are outfitted with Trilogy Virtual panels. Labeled with key personnel throughout the retail store, a cashier can contact anyone quickly and efficiently. The virtual panels are managed through a Trilogy MIU device in the Operation Team’s control room. There, users can communicate with other team members using the virtual panel on their PCs. An LQ-4W2 IP interface allows a connection to the Warehouse where pickers use a DX410 wireless system to roam throughout the RF coverage area to gather product and deliver it to the customer at the front of the store.

View Diagram