Skip to main menu Skip to main content Skip to footer
FSII-BP24

FSII-BP24

FreeSpeak II 2.4 GHz Wireless Beltpack

  • Functions with FSII base, FreeSpeak Edge base, Arcadia Central Station, E-IPA-HX card, and FSII splitter hardware
  • Typical indoor range: 300 ft (90m), outdoor range: 800 ft (240m)
  • 1.9 and 2.4 GHz beltpacks operate on a single system
  • Up to 65 – 90 beltpacks on a single system
  • "Listen Again" message replay
  • Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
  • Over-the-air beltpack registration
  • 18+ hour battery life or USB port for continuous operation
  • XLR-4M headset connector
  • IP53 rating for wet and dusty conditions
  • Built-in flashlight
Print
17409 Rate this article:
No rating
Item Code

FSII-BP24-X4

FSII-BP24-X5

FSII-BP24-X7

FSII-BP24-X4-EU

FSII-BP24-X5-EU

FSII-BP24-X7-EU

Technical Specifications Left
Audio

Audio Bandwidth: 200Hz-7.5KHz

No. of Full-Duplex Audio Paths: Up to 5 with individual level control (2 dedicated rotaries, 3 with menu), 2 controls and a main volume

Mode of Operation: Full duplex on all routes

Level/Talk Controls: 4 pushbuttons, a reply button and 2 rotary controls

Enter/Answer-Back Button: 1

 
Radio

Frequency Spectrum: 2.400-2.483MHz for EU and US cellular auto roaming technology

Modulation: GFSK, TDMA frame 10ms full and long slot

Output power: (EU) 18-22dBm, (US) 18-20dBm

Range: Typical indoor range 300ft (90m), outdoor range 800ft (240m)

Battery: Li-Ion or 3 AA alkaline cells

Battery Charging: Drop-in charger (AC60) or local USB

Battery Life: 18+ hours with Li-Ion; 9 hours with 3 x Alkaline AA cells

 
Connectors

Headset Connector: 4-pin male, Clear-Com standard, options for 5-pin female and 7-pin male with PTT

Headset Voltage: Maximum of ~+8dBu as set by firmware

Microphone Type: Electret and Dynamic, selectable in beltpack menu

Microphone Voltage: Electret Mic:-45dBu (additional 2.5V DC bias voltage positive on Pin 2 and negative on Pin 1 via a 1k resistor).

Headset Limiter: Selectable from beltpack menu

Technical Specifications Right
Environmental

IP53 water and dust resistance

Operating: 32º-125ºF (0º-50ºC)

Storage: 32º-150ºF (0º-70ºC)

Humidity: Between 20% and 90%, Non-Condensing

 
Dimensions

Tapered design at largest points

3.75 x 5 x 1.5 in (HxWxD)

(97 x 130 x 45mm)

 
Weight

9.0 oz (0.25kg) including batteries

Mark as DiscontinuedNo
Rank9999
IsActiveTest
Please login or register to post comments.

Why Choose Trilogy Mercury?

NEED BENEFIT

Allow contributing team members to connect remotely and effortlessly to core intercom users.

NEED BENEFIT

Download app from the Apple iTune Store (for iOS devices) or Google Playstore (for Android devices) and be connected to the host Eclipse HX system or LQ Core Configuration Manager. Access is granted by the System Administrator.

Retail Warehouse Communications

Cashiers, Operations and the Warehouse are all connected via an IP network on which audio can be delivered. At Customer Checkout, cashiers POS stations are outfitted with Trilogy Virtual panels. Labeled with key personnel throughout the retail store, a cashier can contact anyone quickly and efficiently. The virtual panels are managed through a Trilogy MIU device in the Operation Team’s control room. There, users can communicate with other team members using the virtual panel on their PCs. An LQ-4W2 IP interface allows a connection to the Warehouse where pickers use a DX410 wireless system to roam throughout the RF coverage area to gather product and deliver it to the customer at the front of the store.

View Diagram