Skip to main menu Skip to main content Skip to footer
WBS-670 (DISCONTINUED)

WBS-670 (DISCONTINUED)

1872
Clear-Com Marketing
/ Categories: Products

  • UHF band, single-channel wireless base station
  • UHF band: operate in select frequency bands between 518-686MHz
  • Single-channel
  • Two separate channels for 2-wire or 4-wire connectivity
  • Supports up to four full-duplex wireless beltpacks
  • Standalone wireless communication system or combined with wired intercoms
  • Full talk/listen headset at the base
  • Rear panel connections allow system expansion
  • Input and output level adjustment controls
  • Stage Announce (SA) button
Item Code

WBS-680/E88 (not all frequency bands are available in all countries)

Technical Specifications Left
BASE STATION

RF Frequency Range: 590-608MHz

Power Requirement: 100-240V AC, 50-60Hz, IEC receptacle

Typical Battery Life Alkaline: N/A

Typical Battery Life - Nickel Metal Hydride (1500 mAh): N/A

Current Draw: N/A

Temperature Range: -4oF to 140oF (20oC to 55oC)

Dimensions: 19.0 x 1.72 x 14.0in (WxHxD)

(48.3 x 4.4 x 35.6cm)

Weight: 6lbs. 15oz. (3.15kg)

Transmit Antenna: 1/2 Wave (supplied), TNC Male Connector

Receiver Antenna: 1/2 Wave (supplied), TNC Male Connector

FCC ID: B5DM514

Frequency Response: 300 - 8,000Hz

Four-Wire Input: Level Adjustable (2 Vrms typical)

Four-Wire Output: Level Adjustable (2 Vrms typical)

Clear-Com® Partyline Levels: Input/Output Level Adjustable (1 Vrms typical), Line Impedance 200 W

RTS® Partyline Levels: Input/Output Level Adjustable (0.775 Vrms typical), Line Impedance 200 W

Telex® Partyline Levels: Input/Output Level Adjustable (1 Vrms typical), Line Impedance 300 W

Auxiliary Input: Adjustable (2 Vrms typical)

Auliliary Output: Adjustable (2 Vrms typical into 600 W) (at rated deviation)

Technical Specifications Right
TRANSMITTER

Type: Synthesized, 720 channels

Transmit Power: 50 mW max. (High), 5 mW (normal)

RF Frequency Stability: 0.005%

Modulation: FM, 40kHz Deviation

Modulation Limiter: Peak-Responding Compressor

Modulation Frequency Range: 300 -8,000Hz +-2dB

Microphone Audio Input: 30 - 3,500W

Microphone Input Sensitivity: 9mV

Radiated Harmonics & Spurious: Exceeds FCC specifications

FCC Acceptance: Type accepted under FCC Part 74

 
RECEIVER

Type: Dual Conversion Superheterodyne, Synthesized, FM, 720 channels

RF Sensitivity: <0.7mV for 12dB SINAD

Signal-to-Noise Ratio: 95dB

IF Selectivity: 3dB at 230kHz

Image Rejection: 70dB or better

Squelch Quieting: 95dB

RF Frequency Stability: 0.005%

Distortion: <1% at full deviation

Local Headset Output: 40mW output into 600 W (1% distortion)

FCC Acceptance: Notification under FCC Part 15

Mark as DiscontinuedDiscontinued
Rank9999
IsActiveTest
Related Articles ---------