2RU 40x40 Optical Multiplexer Devices
- Uses CWDM or DWDM to single-fiber I/O ports
- Up to 24 BNC-SDI ports for 3G/HD/SD video input or output with or without reclockers
- Up to 20 additional general protocol-independent duplex LC fiber ports
- Up to 36 general protocol-independent simplex LC fiber ports
- Protocol Independence for routing 1G Ethernet, SMPTE311m camera feeds, intercom, MADI, Optocore signals and 3rd-party digital audio at the same time on the same device
- Compatible with BroaMan devices for distributed transport solutions
- Optional Route66 will automatically patch assigned channels to 5, 10, or 20 satellite stageboxes
| Item Code | Route66-AUTO-5
Route66-AUTO-10
Route66-AUTO-15
Route66-AUTO-20 |
| Technical Specifications Left |
Optical Link
Connection: Duplex LC
Protocol: Independent (no restriction)
Transmission: Full Duplex
Fiber Cable Lengths: Standard single mode transceiver =10 km; Special single mode transceiver = 80 km (on request)
SANE, LAN Ports
Audio: TIA – 568A/B, Optocore; 200 Mbit/s
LAN: TIA – 568A/B, IEEE - 802.3; 10/100 Mbit/s
Auxiliary Ports
Fiber Duplex LC 1310nm fiber tunnel Protocol: Independent (no restrictions)
Data Port
Data Channels: Digital control data; 4
Data Rate: Up to 10 Mbps
Impedance
Termination: 330 O
Source: = 10 O
Video
Standards: SD, ED, HD, Dual Link, 3G
Complies with SMPTE: 259M, 292M, 344M, 372M, 424M
Interface: SDI – Serial Digital Interface
|
| Technical Specifications Right |
Word Clock
Hardware Standard: BNC – 75 O
Data Rate: Dependent on sample rate; Up to 192 kHz
Impedance: Output = 5, O Input 75 O
Drive Level: Output; = 1 Vpp
Zero Level: Referring to GND; +1.7 V
Sense Level: Input; = 400 mVpp
Optical Connection
Complies with 21 CFR 1040.10 and 1040.11
Remote Control
RS232: EIA / TIA – 232; 57 600 Baud
USB: USB 2.0 – Device; 12 Mbit/s
LAN: IEEE – 802.3; 10/100 Mbit/s
Power Supply
Type: Switch-mode, universal input
Main Voltage: 100-240V; 50-60Hz
Frequency: 50-60Hz
Cooling: Passive, via surface and ventilation openings on both sides of the device
Dual Redundancy
Dimensions
3.46 x 19 x 7.87in (HxWxD)
(88 x 483 x 200mm)
Weight
Dependent on configuration |
| Mark as Discontinued | Discontinued |
| Rank | 9999 |
| IsActiveTest | |
Related Articles ---------