4-Port Digital Intercom Audio and Data Control I/O Interface Device
- Interfaces with Clear-Com and RTS/Telex intercom panels, interfaces and matrices
- Available in two hardware configurations: RS422 for Clear-Com and RS485 for RTS/Telex
- Offers four RJ45 4-wire intercom ports
- Dual power supplies with automatic switchover included
- Features the Optocore™ Optical and SANE™ CAT5 Digital Network technologies
- Duplicated 4-wire Intercom Port wiring with reversed I/O and Rx/Tx
- 2 x 100 Mbit Ethernet ports
- 4 x RS485 serial data connections
- Word Clock input and output
- 2 x optical LINK interface with duplex LC connectors
- USB and RS232 ports for configuration and control
| Item Code | PG4-INTERCOM-CC-FX
PG4-INTERCOM-485-FX
PG4-INTERCOM-444-FX |
| Technical Specifications Left |
Intercom Ports
Convention: EIA / TIA – 422 or EIA / TIA – 485
Hardware Standard: IC422/IC485; FCC-RJ45
Analog Line Input
Impedance: 10KOhms
Maximum Input Level: +18dBu
SNR: 115dB (A-weighted)
THD+N a -1dBFS: >100dB
Analog Line Output
Impedance: 45Ohms
Maximum Output Level: +18dBu
SNR: 115dB (A-weighted)
THD+N @ -1dBFS: >98dB
SANE, LAN ports
Audio: TIA - 568A/B; Optocore 200 Mbit/s
LAN: TIA - 568A/B; IEEE - 802.3; 10/100 Mbit/s
Auxiliary Ports
Convention: EIA / TIA-485
Number of Data Channels: 4
Data Channel Type: Digital control data
Data Rate: Up to 10 Mbps
Impedance
Termination: 330Ohm
Source: = 10Ohm
Word Clock
Hardware standard: 75Ohm / BNC
Data Rate: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (Depending on used sample rate)
Impedance Input: 1k / 75Ohm software switch
Impedance Output: 75Ohm
Optical Link
Input, Output, Dual: Full bandwidth
Connection: Duplex LC
Protocol: Optocore
Transmission: Full-duplex
Data Rate: 2 x 2Gbps
Optical Wave Guide Cable Lengths: Multi-mode fiber 50µm; = 700m Single-mode fiber 9µm; 10km (70 km on request)
|
| Technical Specifications Right |
Power Supply
Number of Power Supplies: 2 (with function check and automatic switch-over)
Type: Switch-mode, universal input
Mains Voltage: 100 - 240V AC; 50 - 60Hz; 25VA-typ; 32VA-peak
Remote Control
RS232/Ethernet/USB Port: Interface to PC
Dimensions
19.2 x 1.73 x 7.87in (WxHxD)
(483 x 44 x 200mm)
Weight
6.0lbs (2.7kg)
Product Model Options
Models
PG4-INTERCOM-CC-FX
PG4-INTERCOM-485-FX
PG4-INTERCOM-444-FX
Connectivity Options
CC – Clear-Com four wire matrix ports with serial control 4 four wire Clear-Com matrix ports with line level and RS422 serial inputs and outputs for Clear-Com key panels, matrices and interfaces. 485 – RTS four wire intercom ports with serial control 4 four wire RTS matrix ports with line level and RS485 serial inputs and outputs for RTS key panels, matrices and interfaces. 444 – Line level inputs and outputs, GPIO and DC output 4 line level inputs and outputs with optically isolated general purpose inputs and relay switched general purpose outputs. Auxiliary DC outputs to power external circuits.
Network Options
FXS and FXM are available with these models.
FX – The Optocore Fiber Network Module allows the converter to be used as a part of a 24 device ProGrid system.
• 4 Serial ports
• 2 LAN ports
• Sync
• 2 SANE/LAN ports
- FXS – For use with Single mode fiber optic cables
- FXM – For use with Multi-mode fiber optic cables
|
| Mark as Discontinued | Discontinued |
| Rank | 9999 |
| IsActiveTest | |
Related Articles ---------