Skip to main menu Skip to main content Skip to footer
FIM-S222 (DISCONTINUED)

FIM-S222 (DISCONTINUED)

1661

Optical Fiber Interface

Clear-Com Marketing
/ Categories: Products

  • For use with Eclipse HX Digital Matrix systems
  • Interfaces with one or two digital matrix panels
  • Highly secure connections
  • 24-bit digital DEMUX
  • 48kHz audio sampling rate
  • Sends and receives RS-422 control data
  • Flat frequency response up to 20kHz, S/N >80dB
  • Up to 20km (12 miles) range with fiber using single mode
  • Up to 5km (3 miles) using multi-mode fiber
  • Works in demanding environmental conditions
  • RJ45 connectors for direct connection with matrix panels, frames and interfaces
  • Can be used to extend any line level 4-wire audio signal / RS-422 signal
  • Can be used with the earlier FIM-102D but the audio will require 5dB of gain.
  • Can be used with the FIM-1222 Fiber cards
Item Code

FIM-S222

Technical Specifications Left
Audio

Transmission Method: Digital, TDM, 24-bit, 48k samples/sec

Input Impedance: 600 Ohms, balanced

Output Impedance: 30 Ohms, balanced

Maximum Input Level (600 Ohms): +18dBm (peak)

Maximum Output Level (from 30 Ohms): +18dBm into 600 Ohms

Frequency Response (@0dBm from 50Hz to 15kHz): ±0.2 dB

Total Harmonic Distortion + Noise: from 20Hz to 20kHz @ +8dBm, <0.2% at 1kHz @ +18dBm, <0.007%

CMRR (Common Mode Rejection Ratio): ±55db @ 1kHz

Signal to Noise Ratio: unweighted, 20Hz - 20kHz, ref. to +18dBm clip level, >80dB

Aggregate Digital Data Rate: 147.456 MB

 
Electro-Optical System Margin Data

Operating Wavelength: 1300nm

TX output into cable: -8 to -15dBm

RX sensitivity: =31dBm

OP Margin Single Mode: 19dBm

OP Margin Multi Mode: 12dBm

 
Matrix Data Communications (Frame-to-Panel Digital Data)
Transmission Rate

RS-422, Balanced TTL Levels: 0 to 150 kBits/sec

Jitter: 1.12 msec* *Higher rates possible dependent upon user system jitter tolerance

Technical Specifications Right
Connectors

Connectors: RJ-45, coaxial

Optical Connectors: ST-type

Power Connector: 2.5mm Circular

 
Power Supply

Input Voltage Range: 9-18V DC

Power Consumption: @13.8V per end, all channels at full level; <5 watts

A/C Adapter: Supplied

 
Temperature

Operating: -40° - +149°F (-40° - +65°C)

Humidity: 0 – 95%, non-condensing

 
Dimensions

7.1 x 3.3 x 1.1in (WxHxD)

(180.3 x 83.8 x 27.9mm)

 
Weight
0.5lbs (0.23kg)
Mark as DiscontinuedDiscontinued
Rank9999
IsActiveTest
Related Articles ---------