Skip to main menu Skip to main content Skip to footer


The BS410 is the base station for the DX410 wireless system, used with wireless BP410 beltpacks. A single DX410 base station supports up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. Two-wire auto-nulling enables fast and accurate integration with Clear-Com and RTS wired partyline systems.


  • 2-channels of communications
  • 2.4GHz license-free operation
  • Supports up to 15 beltpacks in a single system
  • 7kHz wideband audio
  • 2-wire and 4-wire bridging on the same system
  • 2-wire auto-nulling
  • Lost packet concealment
  • Simple to set up and configure

Item Code

CZ-BS410: For worldwide use

CZ-BS410-EU: ETSI compliant base station for EU countries requiring CE mark



Channels: 2 audio channels

Capacity: Up to 15 BP410 and/or WH410 per base station

Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex. Radio Frequency Range: 2400 – 2483.5 MHz

Audio Frequency: 200 Hz – 7kHz

4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire

2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200Ω , level adjustable, null adjustable to 50dB attenuation, typical

Aux Input: XLR-3F with ¼” (6.35mm) combo jack, 600Ω  balanced, level adjustable

Aux Output: XLR-3M, 600Ω  balanced, level adjustable

Headset Connector: 4-pin mini-DIN, Electret microphone

Headset Output: 200mW into 32Ω 

Antenna Type: External ½-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity

System Distortion: <2%

Communication Security: dual-slot diversity


Type: Frequency Hopping, Spread Spectrum (FHSS)

Transmit Power: 100mW burst

Modulation Type: Gaussian filtered FSK, TDMA

Frequency Stability: 13 ppm

Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature


Type: Frequency Hopping, Spread Spectrum (FHSS)

RF Sensitivity: <-90dBm w 10-3 BER

Frequency Stability: 13 ppm

Distortion: <2%

Power Requirements
100 – 240V AC, 50 – 60Hz or 12 – 14V DC
Temperature: +32° - +122°F (0° - +50°C)

1.75 x 19.0 x 17.13in (HxWxD)

(44 x 483 x 435mm)

9lbs (4.1kg)

Ready to get

Our team of communications professionals are here to support your project. Contact us today to start designing your custom intercom solution.

Sales Contacts Where to Buy/Rent