Clear-Com Marketing / Wednesday, November 8, 2017 / Categories: ProGrid Audio Network PG4-INTERCOM (DISCONTINUED) 4-Port Digital Intercom Audio and Data Control I/O Interface Device Interfaces with Clear-Com and RTS/Telex intercom panels, interfaces and matrices Available in two hardware configurations: RS422 for Clear-Com and RS485 for RTS/Telex Offers four RJ45 4-wire intercom ports Dual power supplies with automatic switchover included Features the Optocore™ Optical and SANE™ CAT5 Digital Network technologies Duplicated 4-wire Intercom Port wiring with reversed I/O and Rx/Tx 2 x 100 Mbit Ethernet ports 4 x RS485 serial data connections Word Clock input and output 2 x optical LINK interface with duplex LC connectors USB and RS232 ports for configuration and control Print 5570 Rate this article: No rating Item CodePG4-INTERCOM-CC-FX PG4-INTERCOM-485-FX PG4-INTERCOM-444-FXTechnical Specifications Left Intercom Ports Convention: EIA / TIA – 422 or EIA / TIA – 485 Hardware Standard: IC422/IC485; FCC-RJ45 Analog Line Input Impedance: 10KOhms Maximum Input Level: +18dBu SNR: 115dB (A-weighted) THD+N a -1dBFS: >100dB Analog Line Output Impedance: 45Ohms Maximum Output Level: +18dBu SNR: 115dB (A-weighted) THD+N @ -1dBFS: >98dB SANE, LAN ports Audio: TIA - 568A/B; Optocore 200 Mbit/s LAN: TIA - 568A/B; IEEE - 802.3; 10/100 Mbit/s Auxiliary Ports Convention: EIA / TIA-485 Number of Data Channels: 4 Data Channel Type: Digital control data Data Rate: Up to 10 Mbps Impedance Termination: 330Ohm Source: = 10Ohm Word Clock Hardware standard: 75Ohm / BNC Data Rate: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (Depending on used sample rate) Impedance Input: 1k / 75Ohm software switch Impedance Output: 75Ohm Optical Link Input, Output, Dual: Full bandwidth Connection: Duplex LC Protocol: Optocore Transmission: Full-duplex Data Rate: 2 x 2Gbps Optical Wave Guide Cable Lengths: Multi-mode fiber 50µm; = 700m Single-mode fiber 9µm; 10km (70 km on request) Technical Specifications Right Power Supply Number of Power Supplies: 2 (with function check and automatic switch-over) Type: Switch-mode, universal input Mains Voltage: 100 - 240V AC; 50 - 60Hz; 25VA-typ; 32VA-peak Remote Control RS232/Ethernet/USB Port: Interface to PC Dimensions 19.2 x 1.73 x 7.87in (WxHxD) (483 x 44 x 200mm) Weight 6.0lbs (2.7kg) Product Model Options Models PG4-INTERCOM-CC-FX PG4-INTERCOM-485-FX PG4-INTERCOM-444-FX Connectivity Options CC – Clear-Com four wire matrix ports with serial control 4 four wire Clear-Com matrix ports with line level and RS422 serial inputs and outputs for Clear-Com key panels, matrices and interfaces. 485 – RTS four wire intercom ports with serial control 4 four wire RTS matrix ports with line level and RS485 serial inputs and outputs for RTS key panels, matrices and interfaces. 444 – Line level inputs and outputs, GPIO and DC output 4 line level inputs and outputs with optically isolated general purpose inputs and relay switched general purpose outputs. Auxiliary DC outputs to power external circuits. Network Options FXS and FXM are available with these models. FX – The Optocore Fiber Network Module allows the converter to be used as a part of a 24 device ProGrid system. • 4 Serial ports • 2 LAN ports • Sync • 2 SANE/LAN ports FXS – For use with Single mode fiber optic cables FXM – For use with Multi-mode fiber optic cables Mark as DiscontinuedDiscontinuedRank9999IsActiveTest More links PG8-AUDIO2605 PG8-INTERCOM2605 PG32-AES2605 PG-YG22605 Optocore Control Software2605 Please login or register to post comments.