| Item Code | Interface Option 1
750-30-01-17: MCU with 12-pin LEMO CIA link, Port 1 AEB, Port 2 RIB
750-30-01-11: MCU with 12-pin LEMO CIA link, Port 1 AEB, Port 2 AEB
750-30-01-77: MCU with 12-pin LEMO CIA link, Port 1 RIB, Port 2 RIB
Interface Option 2
750-30-02-17: MCU with XLR7-F CIA link, Port 1 AEB, Port 2 RIB
750-30-02-11: MCU with XLR7-F CIA link, Port 1 AEB, Port 2 AEB
750-30-02-77: MCU with XLR7-F CIA link, Port 1 RIB, Port 2 RIB
Interface Option 3
750-30-03-17: MCU with XLR7-M CIA link, Port 1 AEB, Port 2 RIB
750-30-03-11: MCU with XLR7-M CIA link, Port 1 AEB, Port 2 AEB
750-30-03-77: MCU with XLR7-M CIA link, Port 1 RIB, Port 2 RIB |
| Product Description Left | Description
The MCU (Mercury Communicator Unit) is a small form-factor device that can simultaneously function as a mission critical operator station, a host to numerous virtual panels and interact with a variety of SIP endpoints.
Operator Station Component
The MCU’s primary function is to provide support for single operator connectivity. With three variants of interface options, the MCU facilitates various connection options for headset + PTT, along with an additional 4-pin LEMO connector. The virtual control surface can be accessible through either the connection of a touch-screen (or non-touch) monitor directly to the MCU’s HDMI and USB ports on the rear of the unit or alternatively with the navigation of a browser to the IP address or hostname of the MCU.
Peer-to-Peer Architecture
The MCU is able to operate peer-to-peer, allowing each device to function in a fully independent manner, relying on no other resource to perform any of its functions. It also can seamlessly interface with other Mercury products (MCU, MMU and MIU), along with any SIP capable endpoints. As a result, the resilience of the Mercury system coupled with the ability to seamlessly integrate with the certified Mercury Cross Domain Solution enables the MCU to operate in any mission critical environment where security is paramount. |
| Product Description Right | Hosting of Virtual Panels
Up to 32 virtual panels can be hosted on a single MCU. The IP connected clients can run on either Windows, iOS or Android devices and have the ability to communicate with any resource that is available to the MCU, including other MCUs, MMUs or MIUs.
SIP Interfacing
Each MCU can use up to 64 of the shared DSP resources to intercommunicate with any SIP enabled endpoint, either through a SIP server, PBX or directly point-to-point using a SIP URI. |
| Technical Specifications Left | AUX 1 & 2
RJ45 connectors for RIB (Radio) or AEB (panel) connections
Interface Option 1
LEMO 12-pin connector compatible with plug FGG3B.312.CLAD10 used for dynamic or electret headsets, PTT & GPIO operation
Interface Option 2
XLR 7 Female
7 Pin Female XLR connector used for dynamic or electret headsets, PTT & GPIO operation
Interface Option 3
XLR 7 Male
7 Pin Male XLR connector used for dynamic or electret headsets, PTT & GPIO operation
AUX PTT Connector
4-pin Lemo socket of type 1B used for AUX PTT
AUX Mic Inputs
Two 3.5mm jacks used for electret headset in conjunction with AUX PTT
Networking
Power-over-Ethernet (PoE) enabled
10/100/1000BaseTX Ethernet Port and pluggable SFP supporting an optional Gigabit
Ethernet 1000Base-SX multimode or single mode transceiver
USB
3 USB type A ports (two 2.0 & one 3.0) used for connection of a mouse, keyboard or external storage device.
Tone Generation
Up to 4 tones can be injected into any audio mix |
| Technical Specifications Right | AUX 1 & 2
RJ45 connectors for RIB (Radio) or AEB (panel) connections
Interface Option 1
LEMO 12-pin connector compatible with plug FGG3B.312.CLAD10 used for dynamic or electret headsets, PTT & GPIO operation
Interface Option 2
XLR 7 Female
7 Pin Female XLR connector used for dynamic or electret headsets, PTT & GPIO operation
Interface Option 3
XLR 7 Male
7 Pin Male XLR connector used for dynamic or electret headsets, PTT & GPIO operation
AUX PTT Connector
4-pin Lemo socket of type 1B used for AUX PTT
AUX Mic Inputs
Two 3.5mm jacks used for electret headset in conjunction with AUX PTT
Networking
Power-over-Ethernet (PoE) enabled
10/100/1000BaseTX Ethernet Port and pluggable SFP supporting an optional Gigabit
Ethernet 1000Base-SX multimode or single mode transceiver
USB
3 USB type A ports (two 2.0 & one 3.0) used for connection of a mouse, keyboard or external storage device.
Tone Generation
Up to 4 tones can be injected into any audio mix |
| Mark as Discontinued | No |
| Rank | 9999 |
| IsActiveTest | |