Skip to main menu Skip to main content Skip to footer

PG2-MADI (DISCONTINUED)

PG2-MADI devices have two MADI input and two MADI output ports, allowing the transmission of up to 128 input and 128 output digital audio channels. Each MADI port can be adjusted to handle different formats according to AES10 standards. The PG2-MADI-C is equipped with coaxial MADI interfaces using standard BNC connectors, suitable for DiGiCo and AVID digital consoles. The PG2-MADI-F is equipped with duplex SC multi-mode optical interfaces. As an interface, it is possible to control ProGrid microphone preamps directly from Soundcraft, Studer, Lawo or SSL digital consoles.

Details

  • Up to 128 input and output MADI channels
  • Up to 56/64 input and output SANE channels
  • 2 x 100 Mbit Ethernet ports
  • 4 x RS485 serial data connections
  • Word Clock input and output
  • Composite video input and output
  • 2 x optical LINK interface with duplex LC connectors
  • USB and RS232 ports for configuration and control
  • Dual power supply for redundancy

Item Code

PG2-MADI-F-FXS

PG2-MADI-F-FXM

PG2-MADI-C-FXS

PG2-MADI-C-FXM

Technical
Specifications

Specifications

MADI Ports (PG2-MADI-F)

Convention: AES10-1991 / AES10-2003

Input: Number of Connectors: 2

Connector Type: Optical Duplex SC

Number of MADI Channels: 56 or 64 per Input

Output: Number of Connectors: 2

Connector Type: Optical Duplex SC

Number of MADI Channels: 56 or 64 per Output

Data Rate: 125 Mbps

Wave Length Output: 1310 nm (typical)

Max. Cable Length: 50/125 µm; 1500m/5000ft (multi-mode)

 
MADI Ports (PG2-MADI-C)

Convention: AES10-1991 / AES10-2003

Input: Number of Connectors: 2

Connector Type: Coaxial BNC

Number of MADI Channels: 56 or 64 per Input

Output: Number of Connectors: 2

Connector Type: Coaxial BNC

Number of MADI Channels: 56 or 64 per Output

Data Rate: 125 Mbps

Impedance: Termination; 75Ohms

 
SANE, LAN ports

Audio: TIA - 568A/B; Optocore 200 Mbit/s

LAN: TIA - 568A/B; IEEE - 802.3; 10/100 Mbit/s

 
Auxiliary Ports

Convention: EIA / TIA-485

Number of Data Channels: 4

Data Channel Type: Digital control data

Data Rate: Up to 10 Mbps

 
Impedance

Termination: 330Ohm

Source: = 10Ohm

 
Word Clock

Hardware standard: 75Ohm / BNC Data Rate: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (Depending on used sample rate)

Impedance Input: 1k / 75Ohm software switch

Impedance Output: 75Ohm

 
Video

Hardware Standard: 75Ohm / BNC

Channels: 1 x input, 1 x output

Format: Composite video

Optical Link

Input, Output, Dual: Full bandwidth

Connection: Duplex LC

Protocol: Optocore

Transmission: Full-duplex

Data Rate: 2 x 2Gbps

Optical Wave Guide Cable Lengths: Multi-mode fiber 50µm; = 700 m Single-mode fiber 9µm; 10km (70 km on request)

 
Power Supply

Number of Power Supplies: 2 (with function check and automatic switch-over)

Type: Switch-mode, universal input

Mains Voltage: 100 - 240V AC; 50 - 60Hz; 10VA-typ

Frequency: 50 - 60Hz

 
Remote Control

Convention: EIA/TIA-232

RS232: RxD, TxD / 57.600 Baud

USB Port: Interface to PC

 
Dimensions

19.2 x 1.73 x 7.87in (WxHxD)

(483 x 44 x 200mm)

 
Weight
6.0lbs (2.7kg)
 
Product Model Options
Models

PG2-MADI-F

PG2-MADI-C

 
Connectivity Options

MADI-F – 2 Optical 64 Channel

MADI Ports MADI-C – 2 Coaxial 64 Channel

MADI Ports

 
Network Options

FXS and FXM are available with these models. FX – The Optocore Fiber Network Module allows the converter to be used as a part of a 24 device ProGrid system.

• 4 Serial ports

• 2 LAN ports

• Sync

• 2 SANE/LAN ports

  • FXS – For use with Single mode fiber optic cables
  • FXM – For use with Multi-mode fiber optic cables

Associated
Products

Ready to get
started?

Our team of communications professionals are here to support your project. Contact us today to start designing your custom intercom solution.

Sales Contacts Where to Buy/Rent