Skip to main menu Skip to main content Skip to footer
HLI-2W2

HLI-2W2

2-Wire Interface Module

Interface

  • 2-wire interface for HMS-4X(2)
  • Auto nulling
  • Level and VOX control
  • Clear-Com / RTS-TW Compatible
  • Call and RMK signaling

The HelixNet System 

  • Wired Partyline - Networked
  • Flexible cabling
  • Up to 24 Channels – Licensed
  • Program Audio user lever control

Effortless Management

  • Fast front panel control and configuration
  • Easy to use CCM browser configuration
  • Plug-and-go with auto discovery
  • Central upgrades from main station
Print
3364 Rate this article:
No rating
Item Code

HLI-2W2

Technical Specifications Left
Connectors

2-wire Partyline: (2) 3-pin XLR-F

 
Partyline

Compatibility: Clear-Com, RTS-TW configurable with Call and Remote Mic Kill

Termination: External system

Nulling: R-L-C hybrid; user initiated Auto-Calibration with Echo Cancellation

Power: 25mA from external system

Voltage: 20-30V DC (max)

Maximum Level Before Clipping: 6dBu

Nominal Input Level: -18dBu (CC), -12dBu (RTS-TW)

Input Impedance: >= 10KO bridging

Route to 4-wire input at 0dBu in: Frequency Response: 100Hz - 10kHz ±3dB

Distortion: <0.2% THD @ 1kHz

Noise: <-55dBu

Route from a 4-wire output at 0dBu out: Frequency Response: 40Hz - 10kHz ±3dB

Distortion: <0.2% THD @ 1kHz

Noise: <-75dBu

 
Dimensions

2.2 x 7.4 x 1.5in (HxWxD)

(57 x 187 x 39mm)

 
Weight

13oz (0.38kg)

Technical Specifications Right
Network Specifications (Firmware Version 4.2+)
Network Protocols

Ethernet IPv4–Unicast Audio and Control mDNS–Multicast Device Discovery

Layer 3–Routable with mDNS function limitations

HTTP–Management RTP–Audio Transport

WavPack–Audio Codec

 
Network Ports

Unicast:

Port 80 TCP–System Management

Port 6001 TCP–System Management

Port 6001 UDP–Audio Streams

Multicast:

Port 5353 UDP–mDNS, Names, Discovery

 
Network Parameters

HMS-4X Endpoint Resource Use: 1 per active port

Bandwidth: 300 (max) kbps from each active port to HMS 1200 (max) kbps from HMS to each active port

Network Jitter Tolerance:<= 128ms jitter buffer per audio stream receiver automatically adjusted to network performance

QoS Tags: DSCP=41, Assured Forwarding (AF)

System reserved IP range: 10.0.0.0/8 for endpoints

Mark as DiscontinuedNo
Rank9999
IsActiveTest
Please login or register to post comments.

Why Choose Station-IC?

Efficient Operation for Multitasking

Station-IC’s ergonomic, easy-to-use interface is designed for familiarity and consistency with other user stations. Station-IC’s large Talk and Listen buttons with individual level control allow operation with mouse and touchscreens. The window can be scaled to fit the screen and shows input and output audio meters. Station-IC’s always-on-top compact mode keeps favorite intercom keys in the smallest window, while working on other applications. Favorite keys can be designated by the user, without administrator involvement, ensuring notifications of incoming calls and Eclipse reply / LQ call keys are always visible.

Robust Technological Foundation

Station-IC uses mission specific audio codecs designed to operate over LAN, WAN and Internet network connections of various quality. Clear-Com’s legendary IP connectivity, drastically minimizes efforts required for network management and routing. Station-IC connects to the host Eclipse HX matrix via the E-IPA/IVC-32 card or to any LQ series Interface device with available capacity.

Event and Subscription License Options

Station-IC is licensed per computer using either Event or Subscription licenses. Event licenses enable effortless licensing for one week or one month duration from the time of first connection and are ideal for short-term surge capacity and rental applications while Subscription licenses are for ongoing requirements at the lowest daily cost. Subscription license expiration is clearly displayed to users in the last month of the subscription. Licenses can load multiple subscription extensions on a single computer for extended duration. License Tickets allow license owners to retrieve and transfer subscription licenses.

Integrates into any Intercom System

Station-IC fully integrates into Eclipse systems with available IP port capacity while LQ offers Channel based routing with a wide variety of LQ interfaces allowing Station-IC to connect to Clear-Com’s Encore Partyline systems, TW Partyline, HelixNet, Two-Way radios, SIP telephone lines and to any other intercom system via four-wire.

Small Budget Production with Partyline and Wireless

For many smaller production facilities, wireless communication or additional endpoint positions are typically out of reach as many systems can be difficult to fit into a finite budget. But with some device creativity, schools, small churches and theatres can put together a wireless system that will greatly enhance their capability to manage their productions. A set of analog wired positions, a Windows or MacOS computer combined with an Android or iOS mobile devices gives anyone a viable wireless system. Featured Products: Station-IC for LQ Series Agent-IC for LQ Series LQ-2W2 RS-703

View Diagram

Communication for Stadium Operations

The Eclipse HX-Delta matrix frame carries point-to-point communication over network gigabit switches to individual panels at static positions. The LQ Series IP interface extends communication to 3rd party communication devices like IP phones and two-way radios. The E-IPA network card also allows for eight licenses each of the Agent-IC mobile app and the Station-IC desktop client. Agent-IC works on any iOS or leading Android device – it gives users a multi-channel virtual panel that can take a signal from Wi-Fi, LTE and 3G transmitters. Station-IC functions on any device running Windows or MacOS. The addition of FreeSpeak Edge to the system allows for mobile staff to communicate from anywhere in the arena. Featured Products: Station-IC for LQ Series Agent-IC for LQ Series Eclipse-HX Delta

View Diagram