Skip to main menu Skip to main content Skip to footer

WBS-680 (DISCONTINUED)

Details

  • Operates in select frequency bands between 590-608MHz
  • Two separate channels for 2-wire, 4-wire, or both
  • Supports up to 4 full-duplex wireless beltpacks
  • Wireless-Talk-Around button momentarily routes audio to only the wireless beltpacks monitoring the current channel
  • Full talk/listen headset at the base
  • Rear panel connections allow system expansion
  • Input and output level adjustment controls
  • Stage Announce (SA) button

Item Code

WBS-680/E88

Technical
Specifications

Base Station

RF Frequency Range: 518-608MHz, 614-686MHz in 18MHz TX and RX bands

Power Requirement: 100-240V AC, 50-60Hz, IEC receptacle

Typical Battery Life Alkaline: N/A

Typical Battery Life - Nickel Metal Hydride (1500 mAh): N/A

Current Draw: N/A

Temperature Range: -4oF to 140oF (20oC to 55oC)

Dimensions: 19.0 x 1.72 x 14.0in (WxHxD)

(48.3 x 4.4 x 35.6cm)

Weight: 7 lbs. 2 oz. (3.24 kg)

Transmit Antenna: 1/2 Wave (supplied), TNC Male Connector

Receiver Antenna: 1/2 Wave (supplied), TNC Male Connector

FCC ID: B5DM514

Frequency Response: 300Hz - 8,000Hz

Four-Wire Input: Level Adjustable (2 Vrms typical)

Four-Wire Output: Level Adjustable (2 Vrms typical)

Clear-Com® Party-line Levels: Input/Output Level Adjustable (1 Vrms typical), Line Impedance 200 W

RTS® Party-line Levels: Input/Output Level Adjustable (0.775 Vrms typical), Line Impedance 200 W

Telex® Party-line Levels: Input/Output Level Adjustable (1 Vrms typical), Line Impedance 300 W

Auxiliary Input: Adjustable (2 Vrms typical)

Auliliary Output: Adjustable (2 Vrms typical into 600 W) (at rated deviation)

Stage Announce Output (WBS-680 only): Internally Adjustable (1Vrms typical at rated deviation into 100K W)

Stage Announce Relay (WBS-680 only): Dry contact, rated at 1Amp, 24 V Max. / N/A

Transmitter

Type: Synthesized, 720 channels

Transmit Power: WBS-680: 100 mW max. (High), 10 mW (normal)

RF Frequency Stability: 0.005%

Modulation: FM, 40 KHz Deviation

Modulation Limiter: Peak-Responding Compressor

Modulation Frequency Range: 300 Hz -8,000 Hz +-2 dB

Microphone Audio Input: 30 W - 3,500 W

Microphone Input Sensitivity: 9 mV

Radiated Harmonics & Spurious: Exceeds FCC specifications

FCC Acceptance: Type accepted under FCC Part 74

 
Receiver

Type: Dual Conversion Superheterodyne, Synthesized, FM, 720 channels

RF Sensitivity: <0.7 mV for 12 dB SINAD

Signal-to-Noise Ratio: 95 dB

IF Selectivity: 3 dB at 230 KHz

Image Rejection: 70 dB or better

Squelch Quieting: 95 dB

RF Frequency Stability: 0.005%

Distortion: <1% at full deviation

Local Headset Output: 40mW output into 600 W (1% distortion)

FCC Acceptance: Notification under FCC Part 15

 
Important Notice:

The FCC has finished its sale of the 600 MHz frequency bands in the United States, and has set a date of July 13, 2020, for wireless intercom users to cease operation in the 617-652 MHz and 663-698 MHz frequencies. If you are in the US and planning on purchasing a WBS system, please order the following models: WBS-680/E88 WTR-680/E88

Ready to get
started?

Our team of communications professionals are here to support your project. Contact us today to start designing your custom intercom solution.

Sales Contacts Where to Buy/Rent