Skip to main menu Skip to main content Skip to footer

HRM-4X

The HelixNet HRM-4X remote station is a 1RU 4-channel intercom user station.

Details

Remote Station

  • Easy to use front panel with OLED displays & backlit keys
  • Headset or hands-free support with speaker and mic
  • 4 Keysets assignable to channels
  • All Talk, Stage Announce, RMK & Program Audio level control
  • Expansion mode for 8-24 channels

Connectivity

  • Ethernet Network port with PoE(1)
  • Powerline loop-through on XLR(3)
  • Program Audio input
  • Stage Announce output
  • Contact closure input & output

HelixNet System

  • Wired Partyline - Networked
  • Hosted by Arcadia or HMS-4X(4)
  • Up to 24 Channels – Licensed
  • Up to 64 HelixNet Endpoints
  • Program Audio user level control

Effortless Management 

  • Easy to use CCM browser configuration
  • Fast front panel control & configuration
  • Central discovery & pairing on Arcadia
  • Plug-and-go Powerline to HMS-4X(4)
  • Central firmware upgrades from host

Item Code

HRM-4X (includes): (1) Inline PSU 15W 48V DC (453G026)

Technical
Specifications

HelixNet System Hosts

Arcadia: Supports up to 64 HelixNet endpoints (HRM-4X, HKB-2X & HXII-BP) over Ethernet. Up to 24 Channels can be HelixNet Enabled using a Licensed Port for assignment to any HelixNet endpoints keyset.

HMS-4X: Supports up to 64 endpoints (HRM-4X, HKB-2X, HBP-2X, HXII-BP, HLI-2W2, HLI-4W2, LQ port). User stations can connect via HMS’s 2 Powerlines (see datasheet for limits) or over Ethernet via optional HLI-ET2 module. HMS allows use of 12 channels which can be expanded to 24 using optional license.

 
Connectors

XLR Powerline**: 3-pin XLR-M/F

Ethernet/PoE*: EtherCON RJ45

Headset: 4-pin XLR–M

Gooseneck Mic: 3-pin Tuchel

Program Audio: 3-pin XLR–F

Stage Announce: 3-pin XLR–M

Hot Mic/IFB Interface: 1/4\" (0.64 cm) TRS jack

GPIO: 9-pin D-type male (1xGPI, 1xGPO)

USB: Type A

DC Power: 3-pin KPJX-PM-3-S

 
Microphone Pre-amplifier

Headset Mic Impedance: 200O (Dynamic)

Headset Mic Voltage: 1.7V (Electret selectable)

Limiter: +23dB

Route to 4-wire output at 0dBu out: Mic Gain: 60dB (Dynamic), 45dB (Electret)

Frequency Response: 300Hz – 10 kHz ±3dB, contoured for intelligibility

Distortion: <0.2% THD @ 1kHz

Noise: <-55dBu (Dynamic),<-65dBu (Electret)

 
Headphone Amplifier

Load Impedance: >32O

Output Level: +12dBu before clipping

Sidetone: -12dB (selectable)

Route from a 4-wire input at 0dBu in: Max Gain: 0dB

Frequency Response: 180Hz – 10kHz +3dB

Distortion: <0.1% THD @ 1kHz

Noise: <-65dBu

Headphone Limiter: 0dB (selectable)

 
Loudspeaker Amplifier

Load Impedance: 8O

Output Level: +18dBu before clipping

Route from a 4-wire input at 0dBu in: Max Gain: 18dB

Frequency Response: 200Hz - 10kHz ±3dB

Distortion: <0.1% THD @ 1kHz

Noise: <-50dBu

 
Program Audio Line Input

Arcadia System Host: Local Listen Only

HMS-4X System Host: Local or Channel Assignable.

Maximum Level Before Clipping: +18dBu

Nominal Input Level: 0dBu (selectable)

Input Impedance: >= 10KO

Route to 4-wire output at 0dBu out: Frequency Response: 20Hz - 10kHz ±3dB

Distortion: <0.2% THD @ 1kHz

Noise: <-65dBu

 
Stage Announce Output

Arcadia System Host: Local SA Only

HMS-4X System Host: Local SA or Channel Assignable.

Maximum Level Before Clipping: 18dBu

Nominal Output Level: 0dBu (selectable)

Output Impedance: <= 100O

Route from a dynamic headset: Frequency Response: 300Hz - 12kHz ±3dB

Distortion: <0.1% THD @ 1kHz

Noise: <-55dBu

 
Hot Mic Output

Maximum Level Before Clipping: +12dBu

Nominal Output Level: 0dBu (selectable)

Output Impedance: <= 100O

Route from a dynamic headset: Frequency Response: 300Hz - 12kHz ±3dB

Distortion: <0.2% THD @ 1kHz

Noise: <-55dBu

 
Logic Inputs -GPI

Assignable to talk, call, mic and headset keys

Input: 1

Style: Powered input, close contact to ground

Detection Voltage (Min): 3V

Input Voltage (Max): 5V

Output Voltage: 5V

Output Current (Max): 1mA

Logic Outputs – GPO/Relay

Assignable to talk, call, SA keys and channel events

Outputs: 1

Style: Power Relay

Normalized: Open or Closed, separate pins

Switching Voltage (Max): 30V

Switching Current (Max): 2A

 
Power

Voltage: 48V DC

Current (Max): 0.3A

Power (Max): 14.4W

BTU (Max): 49BTU/hr

Input Power Connector: KPJX-PM-3-S

This unit can be powered via: AC Adapter - Inline: Input Voltage Range: 100 - 240V AC

Input Frequency Range: 50 - 60Hz

Input Power Connector: IEC-C14

Output Voltage: 48V DC

Output Power (Max): 15W

Output Power Connector: KPPX-3-P PoE - Power over Ethernet* IEEE 802.3af-2003 - Class 0

PSE: 15.4W DC max @ Power Source Req.

PD: 12.95W DC max @ Powered Device Draw

Powerline**: Input Voltage: ±29.5V DC

Input Current (Speaker Off): 0.3A

Input Current (Max): 0.5A

Powerline Utilization:

HRM (Local Power) = 1 beltpack

HRM (Speaker Off) = 2 beltpacks

HRM (Speaker On) = 3 beltpacks

Note the maximum Powerline capacity of the HMS-4X. Use HelixNet Cable Calculator to validate load and cable distance.

 
Environmental

32º - +104ºF (0 - +40ºC) 90% relative humidity

 
Dimensions

1RU, 1.75 x 19 x 6.4in (HxWxD)

(44 x 483 x 165mm)

 
Weight

4lbs (1.8kg)

 
Network Specifications (Firmware Version 4.2+)
Network Protocols

Ethernet IPv4–Unicast Audio and Control

mDNS–Multicast Device Discovery Layer 3 routable with mDNS function limitations

HTTP–Management RTP–Audio Transport WavPack–Audio Codec

 
Network Ports

Unicast:

Port 80 TCP–System Management, Expansion

Port 6001 TCP–System Management

Port 6001 UDP–Audio Streams

Multicast: Port 5353 UDP–mDNS, Names, Discovery, Linking, Expansion Optional for device names and linking Mandatory for HMS/HRM Expansion

 
Network Parameters

HMS-4X Endpoint Resource Use: 1-3

Bandwidth: 300-600 (max) kbps from HRM to HMS dependent on use of Program Audio Input 1200-2400 (max) kbps from HMS to HRM dependent on use of Stage Announce Output

Network Jitter Tolerance: <= 128ms jitter buffer per audio stream receiver automatically adjusted to network performance

QoS Tags: DSCP=41, Assured Forwarding (AF)

Link-Local Default IP Address Range: 169.254.0.0/16

System Reserved IP Range: 10.0.0.0/8 for endpoints

 
Recommended Ethernet Switches

• Managed Ethernet Switch – Layer 3

• 100/1000 Base-T ports for endpoints

• 1000 Base IP Trunks between switches

• QoS Configuration

• Energy Efficient Ethernet bypass option

• IGMP Snooping bypass option

Ready to get
started?

Our team of communications professionals are here to support your project. Contact us today to start designing your custom intercom solution.

Sales Contacts Where to Buy/Rent