Clear-Com Eclipse matrix connections

Both matrix and LQ must be connected to a network and able to reach each other across the network settings.

To set up this connection:

• Define port slots on the IVC-32 in the EHX configuration software
• Define IVC-32 virtual ports in the External Systems page of the Core Config.uration Manager (CCM) and connect to the IVC-32
• Put required ports together in a Channel
• Program audio and GPIO relays if required.

In EHX, program the ports you want to connect to.

Program ports in EHX. Navigate to EHX>Cards and Ports.Click image to enlarge/minimize

When you have set up the new ports, you must Apply changes to Matrix.

Find IVC32 card IP address. Click image to enlarge/minimize

In the LQ Core Configuration Manager (CCM), create the IVC-32 card, and enter the TCP/IP address and port of the IVC-32 to be connected to.

How to create IVC-32 card slots in the CCM. Click image to enlarge/minimize

Next, you need to create a port, or ports for the card. You must have to hand User ID and Password that you entered into the EHX interface.

When the LQ is connected to the IVC-32 card, a green status LED shows. If the connection is not successful, a yellow warning displays. Click the yellow warning symbol for information.

Once ports are created, they can be seen in the Assignments page and put into Channels.