How do I link an LQ device to a Public Branch Exchange (PBX)?

You must first create extensions within your PBX. Refer to your PBX documentation for this. Make a note of the PBX IP address and the User ID and Password of the extensions you require to connect to the LQ device.

The PBX and the LQ unit must be connected to the same network and be able to see each other across the network.

Note:

The PBX and the LQ must not be configured to the IP range 172.23.xx.xx .

1. Open the LQ CCM in a browser.
2. Navigate to the Accounts page and select the SIP button from the left side of the page.
3. Click '+' to begin to define the PBX. Follow the steps illustrated below.

Click image to enlarge/minimize

Note:

The Registrar/Proxy Port and the Domain are controlled by the PBX admin. The Proxy Port usually defaults to 5060.