Setting full menu access

Use this setting to override the menu access for the beltpack role. The following menu access levels apply:

• None

• Basic

• Normal

• Advanced

If this setting is not enabled, the menu access is set in the EHX software to one of the above four levels. When it is enabled, the beltpack has full menu access.

Note:

If you change this setting, it will apply until the beltpack role changes, or the beltpack is power cycled.

1. To enter the beltpack menu, press and hold the Menu key.
2. Use the rotary and Menu Select keys to select Settings > Admin Options. You will be prompted to enter a four digit code. The default code is 4632.
3. Select Full Menu Access.

4. Use either rotary control to select between:

   • Disable (default)
   • Enable