LMC-64 Interface Card

The LMC-64 interface allows the Eclipse HX matrix to provide Dynam-EC (routing software) clients with audio level metering of Party Lines (Conferences) and 4-Wire ports via an IP network.

Each LMC-64 interface comprises:

• A front card with a reset button and various status indicators.

• A rear card with eleven RJ45 ports giving eight E1/T1 ports (not used), DECT sync in and out (not used) and a LAN port for IP connectivity.

Each LMC-64 front card has status LEDs for power, port activity and LAN status. The LAN indicators show whether there is a LAN connection and the IP activity on the LAN port.

A total of four E-Que, IVC-32 or LMC-64 interface cards may be fitted to an Eclipse HX-Omega unless the matrix is fitted with a Power-One/Bel Fuse PSU. If the matrix has a Power-One/Bel Fuse PSU, up to six E-Que, IVC-32 or LMC-64 cards may be fitted with the following condition:

• You can only have four wireless E-Que cards

• You can only have four E-Que cards with EM signaling enabled.

Note:

For the order in which interface cards must be installed to the Eclipse HX-Omega, see Installing Interface Cards.

Cards slide vertically into the front of the matrix and connect to the backplane.