Connecting E-MADI 64 Audio (Using Coaxial or Fiber cable)

When you connect the external E-MADI64 Audio (using Coaxial or Fiber cable) to the rear of theE-MADI64 card:

1. The sample rate and the number of configured ports is indicated by a solid green LED on the front of the E-MADI64 card.

2. The red Error LED on the E-MADI64 card is turned off.

3. When the number of received channels differs from the number of channels configured in EHX, the Channel LEDs on the front of the E-MADI64 card flash green, oscillating between 2 types of port numbers.

4. When the received sample rate differs from the configured sample rate, the Sample rate LEDs on the front of the E-MADI64 card flash green, oscillating between 2 types of sample rates.

5. Audio passes into and out of the E-MADI64 card to the HX-Median backplane.