Apply Changes with Reset and Clear all Memory

1. Select Apply changes with reset and clear all memory (overwrite matrix with EHX configuration) to clear down any active routes and reset the matrix to the EHX default configuration. Any local changes to groups, partylines or IFBs made through i-Series panels, V-Series panels and Dynam-EC are reset to the EHX map default.

This type of reset (also known as a Black reset) is used for:

• Correcting erroneous or spurious crosspoints.

• Any locally assigned keys are also lost.

• Crosspoints - all active keys are reset to off.

• Crosspoint levels - all panel listen levels are rest to normal.

• Locally assigned keys - any locally assigned keys are deleted, including Fast Assign Keys.

• Local panel microphone settings - all panel microphone settings are set to the EHX downloaded value.

• Local panel sidetone gains are set to the EHX downloaded value.

• Key status - all keys are unmade.

• Any local changes to groups, party lines and IFBs made through i-Series panels, V-Series panels and Dynam-EC are reset to the EHX map default.

• Locally assigned fixed groups - all groups are reset to the EHX default.

• Locally assigned partylines and Dynam-EC -all partylines are reset to the EHX default.

• Locally assigned IFBs and Dynam-EC -all IFBs are reset to the EHX default.

• Locally assigned forced listens and Dynam-EC -all Forced listens are reset to the EHX default.

• Input levels - Matrix input levels are reset to the EHX download value.

• Output levels - Matrix output levels are reset to the EHX download value.

• OTA registration – OTA registration is cleared. Therefore, any registrations that have not been retrieved will be lost.