Panel Information Display (IVC Panels Only)

Click the cog icon on the panel for information and to edit the panel settings. The panel information displayed shows the following:

• Panel - panel type.

• MAC - panel MAC address.

• User ID – the panel user ID found in panel properties.

• Connection - the protocol used in the panel connection.

• Connected - the length of time the panel has been connected without a reset.

• Powered - the length of time since the panel was last powered up.

The IP settings displayed are the same as those set on the panel using the panel IP setup menus (see the V-Series Manual).

• Login IP - the IP address of the IVC-32 card that the panel tries to log in to.

• Login Port - the port the panel uses to log in to the IVC-32 card.

• DHCP Enabled - whether the panel should obtain an address from a DHCP server or use a preset address.

• Connection - the type of connection: WAN, LAN or Internet.

• IP Address - the IP address of the panel.

• Netmask - the subnet mask for the network the panel is on.

• Gateway - the IP address of the gateway to be used when connecting to the matrix.

• DNS - the IP address of the Domain Name Server to be used by the panel to obtain an IP address automatically if DHCP is enabled.