EHX Supervisor Mode

EHX Supervisor mode enables you to take control of a V-Series panel or FreeSpeak II beltpack that is connected to the matrix. For example, if a panel user is having difficulty with a panel, EHX supervisor mode allows the EHX Configuration Software to remotely access and control the panel. The following apply:

• EHX supervisor mode is not possible if a panel is already in supervisor mode (activated from the front panel).

• EHX supervisor mode cannot modify audio levels on a FreeSpeak II beltpack, and cannot enter menu mode or navigate the menus.

• EHX supervisor mode cannot control latch disabled key.

To enable/disable supervisor mode, toggle the Supervisor Mode slider control on the right-hand-side of the ribbon.

With supervisor mode enabled you can adjust volume levels and click on controls on the EHX software mimic to operates the panel or beltpack remotely. Any user activity on the panel is also visible on the EHX software mimic.

Note:

Supervisor mode does not work with expansion panels.